This weatherproof proximity card reader is a perfect access control device for outside doors in factories, office buildings, and other sensitive areas. Maximum distance is approx. 18cm (7 inches). If you need to control access at a security door, this indoor/outdoor proximity card reader is a perfect choice for large applications.
Big and clear LCD display, 4 lines text, 1024 x 64 pixel graphic

Unlimited site codes

11 sets of time zones

Different time zone for each user

Up to 120 holiday schedules

Auto-show work status (set via time zone edit)

Master cards range assignable

RS-485 support for networking (via controller or directly)

Built-in door sensing and arming inputs (on/off)

Auto open/close scheduling of doors

Control mode, card capacity and card type assignable by user directly

Built-in proximity reader and external Wiegand reader port

Auto-discriminating between stand-alone & networking system

Alarm function available (tamper, force entrance, door sense)

Networking: RS-485, 9600, N, 8, 1

External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader

RF Frequency / Reading range 125 kHz / 10-18cm

Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. latch type

Alarm relay: 12VDC @ 2A NO/NC/(jumper) 0.0-600 sec. (COM Common)

DI input: Egress button / door sensor / card sensor

Transistor output: Arming / door sensor / card sensor

Tamper switch limit switch (form C)

Serial port: supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)

Made of ABS plastic

Dimensions: 127mm x 91mm x 46mm (5" x 3.58" x 1.81")

Connects easily to our ECL-ACC1000.

Connect to PC using ECL-CN550.