CAMERA IMAGE LAYOUT
AVTECH / CPCAM DVRS AVC 761, 785, 787, CPCAM 503, 505, 507, 561
To change the camera image layout during live view:
1) Go to the live view
2) Press "SET/ENTER" - one of the camera images will go green
3) Use the Up/Down/Left/Right buttons to move the green box around to select one of the cameras (or an empty channel)
4) Use the + and - buttons to select a channel number. The channel numbers are in white.
5) Press "SET/ENTER" again.
To change the camera image layout during playback:
1) Go into playback mode (just hit Play)
2) Press "SET/ENTER" - one of the camera images will go green
3) Use the Up/Down/Left/Right buttons to move the green box around to select one of the cameras (or an empty channel)
4) Use the + and - buttons to select a channel number ....
As you cycle through the channels numbers you will see they switch between white and yellow as you roll over (ie White 1-2-3-4 then Yellow 1-2-3-4 then White 1-2-3-4 etc)
When you select a channel number, White means LIVE and Yellow means PLAYBACK.
5) Press "SET/ENTER" again.
ie - While you are playing back you want camera image 4 to show a live view of channel 1... Press 'Set' button, use up/down/left/right to highlight image 4, then user + / - to select "WHITE" 01, then press Set.
ie If you want to restore your 4ch playback to factory default...
1) - Press 'Set' button, use up/down/left/right to highlight image 1, then user + / - to select "YELLOW" 01, then press Set.
Repeat for images 2-4.