AVC 760AS / Nubix 4ST

When connecting to the AVC 760 via the internet note that you will not be able to control the Server Settings unless the DVR is in Supervisor mode only!

VIDEO VIEWER

MISCELLANEOUS CONTROL

CONFIGURE SCREEN

SERVER SETTINGS

User Level	Supervisor	Power User	Normal User	Guest User
AdressBook	*	*	*	*
(MISC Control)
Color Setting	*	X	X	X
Backup	*	X	X	X
Record Setting	*	*	*	*
Server Setting	*	X	X	*
Tools	*	X	X	X
Status List	*	*	*	*
____________		*	*	*
Record	*	*	*	*
Snapshot	*	*	*	*
Information	*	*	*	*
DVR Control	*	*	*	X

There are 4 models

Model 1 2 3 4

HDD HDD SATA SATA SATA

VGA NO NO NO YES

USB NO NO YES YES

BACKUP NETWORK NET NET/USB NET/USB

IR CONTROL NO NO YES YES

The cameras must be connected and power-supplied BEFORE the DVR is turned on. The DVR will automatically

detect the video system of the connected camera(s) (NTSC / PAL), and switch itself to the correct system.

NOTE: You can’t select a single channel for video playback. During the playback mode, you can only see

the quad view.

8.3 QuickTime Player

You can also use the QuickTime player to remotely log into the DVR and check the live view only.

Step 1: Go to Apple’s official website to download QuickTime. The website address is as follows:

http://www.apple.com/quicktime/win.html

a). Click “Download” to go into the download page, and select to download the free player.

b). Leave your Email address, and press “Free Download Now” to download the latest QuickTime player.

c). When the download is completed, execute the “QuickTimeInstaller.exe” file, and follow the on-screen

instructions to finish the installation procedure.

Step 2: Open your QuickTime player. Select “File” → “Open URL”, and key in the URL address.

The URL format is “rtsp://ipaddress/live/mpeg4” (For example, “rtsp://59.124.231.75/live/mpeg4”).

Click “OK” to continue

Step 3: A pop-up window will appear and prompt you to enter the authentication information. Key in the user

name and password for accessing your DVR. The user name and password are the same as the ones

you use to log into the AP.

If the information is correct, press “OK” to go on. If not, press “Cancel” to quit the accessing.

Step 4: When the login is successful, you will see a similar screen as the following.

APPLE QUICK TIME FILE FORMAT SPECIFICATION

I looked at the PC Board of this new model DVR, and it had 761AM-V02A marked on it.

This is an MPEG 4 DVR only and no MJPEG is offered.

What is different about this DVR is that it transmits over the internet using MPEG 4 unlike all of the other past models that transmit over the internet using MJPEG.

I do not know if the the same 761AM board is shared between the 671, and the 760AS, and if the 760 has parts missing that take away the specs of the 761.

The back of the AVC 760 / Nubix 4ST does not match the Reg 4 channel DVR rear panel as seen in the old Model numbers 1, 2, 3, or 4.

The AS model 1 looks the same as the old model 3, but does not have the D/V port.

It does have a fan unlike the old Model 3.

The main menu has an extra line:
Quick Search (Date and Search HDD)
Record
Timer
Date
Advance

6.1 QUICK SEARCH
In this menu list, you can search any specific events by time and directly play the file you find.
Move the cursor to “QUICK SEARCH”, and press “ENTER” button.
You will see a similar screen as the following:

The submenu items are described below:
1) DATE
Select the specific time period (YEAR / MONTH / DAY / HOUR / MIN) that you want to search.
2) SEARCH HDD
Change to the HDD you want if there are more than 1 HDD in your DVR.
3) START
Move the cursor to “START” and press “ENTER” button to search and directly playback the recorded files.

6.2 RECORD
In this menu list, you can set record settings. Press “MENU” button on the front panel to enter the main menu list.
The default admin password is 0000. Enter the default password, and press “ENTER”. Users can change the password
later.
Move the cursor to “RECORD”, and press ” ENTER”. The screen will show the following options:

The submenu items are described below:
1) IMAGE SIZE
select FRAME or CIF.
2) QUALITY
Select one of the 4 quality options: BEST, HIGH, NORMAL and BASIC.
3) MANUAL RECORD ENABLE
Start / stop the manual recording function.
4) EVENT RECORD ENABLE
Start / stop the event recording function. When this function is enabled, the recording will be triggered by any
motion or external alarm.
5) TIMER RECORD ENABLE
Start / stop the timer recording function.
6) MANUAL RECORD IPS
Select the images per second for MANUAL RECORD.
7) EVENT RECORD IPS
Select the images per second for EVENT RECORD (Recording that is triggered by alarm or motion).
8 ) TIMER RECORD IPS
Select the images per second for TIMER RECORD (Recording that is activated according to the scheduled time).

There is a Model 2 that has the IR port, a VGA port (built in), and a USB port.
This is probably the AVC 761A

Setting up the Remote Viewer will seam extremely difficult if you are used to the older AVC 760. If you have experience with "higher end" DVRs then you will be able to figure things out for yourself. If this is the first time you have ever set up a remote software then pack a lunch, sit down, and read the manual a couple of times, and you should be ok!

I do not work on high end DVRs, but have played with one here, and there. I have enough background to kind of figure what needs to be done, but I felt extremely lost when I was trying to just get live video.

Where you get your server software will depend on how you will put it on to your computer. If you have received your software as a zip "package" then use this:

http://www.winzip.com/downwz.htm

This is a trial version of the software. This is free, but it does not have all of the bells, and whistles available to you, but feel free to pay for the software to have the complete package.

You will load this on to your computer, and then you will "activate" it so that you can unzip your software. When the WinZip software screen comes up just click on the evaulation option

If you have received it as rar "package" then use this:

http://www.rarlab.com/download.htm

Select your country for language, and download the software. This is free but it does not have al of the bells,a dn whistles available to you.

If you are computer savy then click on

Start This is at the bottom left of your XP computer, or click on the Vista Icon on the bottom left. Click My Computer. Click on local Disk (C:). Click on Program Files.

Here is where your software is going to be stored.

FAQ (Frequently ask question)

Questions Solutions

No power

Check power cord connection.

Confirm that there is power supplied from the outlet.

DVR is not working when pressing any button

You might be under “Key Lock” mode. Press any key and enter the password to exit this mode.

HDD detection failed

Replace with another HDD for testing.

Replace with another HDD cable for testing.

Make sure HDD “Master”, “Slave” mode is correctly set.

Can’t detect your USB flash drive

Replace with another USB flash drive for testing.

Format the USB flash drive as FAT32 format and try again.

No live video

Confirm the camera is power supplied.

Check the setting of the camera lens.

Check the monitor’s video cable and connection.

Check the camera’s video cable and connection.

No recorded video

Check if the HDD is installed and connected properly.

Check the “MANUAL RECORD ENABLE” is set to “ON” , and the record function in

the “CAMERA” menu is set to “ON” too.

Timer recording is not working

Check if “TIMER RECORD ENABLE” option is set to “ON” and the timer schedule has been arranged.

Motion detection recording is not working

Check if “EVENT RECORD ENABLE” option is set to “ON”.

Check the detection function “DET” is set to “ON”.

Check the detection area “AREA” has been setup.

Can’t play the recorded data on my DVR

There must be at least 8192 images of recorded data for playback to work properly.

If not, your DVR will stop the playback.

For example, if the IPS is set to 30, the recording time should be at least 273

seconds (8192 images / 30 IPS) for the playback to work properly.

Can’t backup the video with audio

Make sure the audio cameras are connected to the DVR channels which support the audio function (CH1, CH2, CH3 and CH4).

Can’t view the DVR images over the network with IE web browser

Check the DVR firmware version.

Please choose to allow the web browser ActiveX or applet in the pop-out message.

Failed to backup the recorded files of the DVR from remote PC side.
(For details, please see “Network Backup” at page 30.)

You need to be a supervisor to operate this function. For details, please see
“Account” at page 39.

Check if the network connection information is correct (IP Address / Port / User Name / Password).

Specify the hard disk (HDD Number) and channel number (Channel) within which have the recorded data you need.

Failed to upgrade the firmware / OSD file

Check the USB flash drive is formatted to FAT32.

Check the firmware / OSD file is correct.

Can’t use the IR remote control

Check whether if the batteries are installed or not.

Aim at the IR receiving zone and try again.

Check the lock button on the DVR front panel is switched to the right position.

SCORPION AUDIO, VIDEO, AND SECURITY!

ARE YOU READY FOR A HOME THEATER OF YOUR OWN?